Sensor is conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants, photocell responds to the light spectrum near to that of a human eye

Works with screw base CFLs for energy savings with power consumption averages under 1-watt

Easy to operate with delay up to 2 minutes to prevent false switching due to light from passing vehicles, lightning, etc. the turn on is 1 to 5fc, turn off is 3 to 15fc in temperature range of -40 degrees to +140 degrees F (-40 degrees to +60 degrees C)

Our cell is cadmium sulphide, conformed coated, 1/2 in. diameter with contacts normally closed (the unit fails in the on position)

Lead wires consists of 3 color coded, minimum 9 in. wire leads, #16AWG, rated for 105 degrees C

5 year warranty

Compact photocontrol with 3/8 Inch NPT thread for mounting through fixtures, lamp posts, or on a weatherproof box cover

Operation delay up to two minutes to prevent false switching due to light from passing vehicles, lightning, etc

Housing and mounting control housing is weather-resistant molded lexan® with ultrasonically welded seams

Flush mounting through 0.6875 Inch hole in post lantern or lighting fixture, 3/8 Inch NPT, stem 3/4 Inch long, gasket and nut supplied

Works with screw base CFLs and LED lamps for energy savings

CSA certified and UL listed

Includes the mechanism with the gasket only

Contact Form SPST